Request Information
H & NH series in 2 efficiency grades, offer the ultimate in high-end filtration.
Unit of Measure

Specifications

Brands

 N/A Clean Liquid Systems

Support Media Material

 N/A Polypropylene

Seal Material

 N/A Thermal Bond

Nominal Outside Diameter (O.D.)

 N/A 2.65 in

Maximum Differential Pressure at 180 Degree Fahrenheit (ºF) (49 Degree Celsius (ºC)) Temperature

 N/A 35 psid
Surface Area1 N/A Up to 5.5 ft²Up to 0.23 m²

Materials of Construction

Hard Outer Cage Material

 N/A Polypropylene

Netted Outer Cage Material

 N/A Polypropylene

Building a Part Number

Cage Type

 N/A Hard Netted

Filter Media

 N/A Polypropylene Melt Blown

Efficiency

 N/A 90 %99.98 %

Retention Rating of 90 and 99.98 Percent (%)

 N/A 0.2 µm0.45 µm1 µm3 µm5 µm10 µm25 µm50 µm

Cartridge Lengths

 N/A 19.5 in. (Available in Netted Cage Only) 29.25 in. (Available in Netted Cage Only) 39 in. (Available in Netted Cage Only) 9.75 in. (Available in Netted Cage Only) 10 in20 in30 in40 in

Available End Caps

 N/A 222/Closed 222/Fin 222/Spring 226/Closed (Available in Hard Cage Only) 226/Fin (Available in Hard Cage Only) 226/Spring (Available in Hard Cage Only) Custom Double Open End (DOE) Gasket Double Open End (DOE)/Plastisol (Available in Netted Cage Only) Single Open End (SOE)/Spring

Gasket/O-Ring Material

 N/A Buna N Ethylene Propylene Diene Monomer (EPDM) Fluorocarbon (FKM) Neoprene Polytetrafluoroethylene (PTFE) Silicone

Rinse

 N/A 18 MΩ

Food and Drug Administration (FDA) Listed Material

Food and Drug Administration (FDA) Listed Materials

 N/A Manufactured from materials which are FDA listed for food contact applications in Title 21 of the U.S. code of federal regulations

Toxicity

Toxicity

 N/A Cartridges are manufactured with no additives or other manufacturing agents. We guarantee all materials used in the production meet FDA Title 21 of the Code of Federal Regulations 174.5 and 177.1520.

Purity

Purity

 N/A Cartridges are Free of Surfactants, Resins, Binders and Adhesives

Sterilization

Sterilization

 N/A Multiple Autoclaving for 30 Minutes at 250ºF (121ºC) under no End Load Conditions, In-line Steam Sterilization is not recommended. May be In-line Sanitized with Hot Water at 180ºF (82ºC) for 1 hour.

Features and Specifications

Features and Specifications

 N/A
  • Offers the highest grade, 90% and 99.98% efficient Cartridges on the market today
  • Our media is manufactured in-house under strict guidelines to ensure consistency
  • Complete in-house testing with a Capillary Flow Porometer guarantees a superior and consistent product
  • With 8 micron ratings and multiple lengths to ensure we produce the element you require
  • Cartridges have thermally bonded end caps and ultrasonic welded media seams for a one piece construction
  • The maximum amount of media is installed in each filter without pleat blinding for increased dirt loading capacity
  • Cartridges are 100% polypropylene - media, inner and outer supports and end caps
  • All media and materials used in production are FDA Title 21 compliant
  • Cartridges are constructed in a clean room environment
  • Cartridges may be ordered with a final rinse of 18 MΩ water
  • Final, one piece construction up to 40" long ensures zero bypass

Applications

Applications

 N/A Beverage Drinking Water Food High Purity Water

Additional Information

Additional Information

 N/A Complete line of absolute rated membrane filter elements for your most demanding applications; we can also custom manufacture for your systems and applications up to 40 inches in length.

CLS helps you meet today's regulatory requirements and provide fresh drinking water to satisfy growing population needs and Water shortages. CLS's filter cartridges and housings are designed to ensure your process will continue to provide fresh drinking water by eliminating sediment and other impurities. CLS continues to develop new and innovative products to meet the challenges in cost effective filtration.
  • 1 Effective Filtration Area per 10" equivalent, dependent upon micron rating.