PES Series For Electronics, Dl Water, Chemical & Beverage Filtration.

PTF Series for Chemical and Vent Filtration with Optimal Air Or Gas Flow.

W & WQ Series with leading-edge depth loading technology.

H & NH series in 2 efficiency grades, offer the ultimate in high-end filtration.

SE & SC Series for Cost Effective Filtration Applications

• Proprietary Carbon Blend Formulations Used for Maximum Adsorption
• Cartridges will reduce Foul Odors, Chlorine Taste and Particulate Matter
• Polypropylene Outer Prefilter
• Consistent density for controlled flow rates and pressure loss
• Polypropylene or Colored Plastisol End Caps Available
• No GAC By-pass or Fluidizing

M Series Cartridges for High Temperature Filtration

Recommends not to flow more than 10 gpm per 10" cartridge at 40 microns and lower.

• No other bag holds more particulate
• Manufactured in USA
• Adds an additional 890 in³ of depth filtration
• Standard size bags to fit most major housing brands
• Available in 1 to 200 µ ratings
• Dual Gradient Depth Media

All elements are 5 layers construction for maximum pleat support and dirt loading.

Standard, Custom, Multi-Layered

Elements offer economical, high quality Beta rated filtration for applications where "absolute" filters are required. Elements are available in cellulose, glass-cellulose and micro glass media with a variety of end configurations and sizes. The pleated design ensures high contaminant retention due to the large surface area. Elements are available in ratings from 2 to 30 µm.

The N Series elements is an economical solution when absolute rated filtration is not required and are constructed with the same high quality material used in the B series. Elements are used for the removal of contaminant from a wide range of products as either prefilters or final filters.

Designed for filtration of water, water based fluids, and a wide range of chemicals. These filter cartridges stand up to continuous use in water based fluids without the softening and/or deterioration common with many resin impregnated paper cartridges. These elements are made with an advanced synthetic polyester media, which allows high flow rates with low pressure drops as well as excellent temperature resistance.

SL elements are available in removal ratings from 5 to 40 µm. SLH elements have wire mesh support for pleat strength are available in micron ranges of 1/2 to 40. Sizes are available to replace many existing paper cartridges.

Hydraulic filter element applications are demanding and require filtration products that can withstand difficult conditions in industrial and mobile applications. Harsh conditions can often apply to hydraulic filter applications (like mining or military applications). Hydraulic power systems require assorted components like pumps, valves and cylinders to name a few. Keeping your system contamination-free with a quality hydraulic filter element can prolong the life of system components.

Stainless steel filter element products and metal felt filter element products for fluid power use. Either style can be cleaned to lengthen filter element life and reduce disposal costs.

Coalescer cartridges are offered in a variety of cartridge configurations to replace current industry cartridges. They are available with double open ends and flat gaskets, open ends with O-Ring seals, and thread base construction. Cartridges are available in a number of different diameters and lengths. All coalescers are single piece construction, resulting in increased strength and reducing the chance of bypass. We use a combination of one or more layers of pleated media and various layers of fiberglass.

Separator cartridge are available in two different designs - silicone treated pleated cellulose and a PTFE coated stainless steel screen. The silicone treated resin impregnated cellulose media is designed to repel small coalesced water droplets that do not settle by gravity and pass through the separator. This pleated media provides effective 5 µm particulate filtration. The PTFE coated screen separators are manufactured with 200 mesh stainless steel coated on both sides with PTFE. This media is hydrophobic allowing the hydrocarbon fluid to pass through while repelling the water droplets.

Single and multi-round housings are constructed of 316L stainless steel designed with standards for filtration applications requiring high purity production. Design characteristics minimize hold up volumes, provide for easy draining and cleanability. External surfaces mechanically polished and internal surface is acid washed for a consistent, easy care finish. Available to accommodate multiple configurations and up to 36 individual cartridges.

SCC/SCB Series housings robust design and high purity construction assures dependable protection for critical process applications.

ICB Series housings robust design and high quality construction assures dependable protection for industrial and commercial applications.

ICS Series housings robust design and high quality construction assures dependable protection for industrial and commercial applications.

ICC Series housings robust design and high quality construction assures dependable protection for industrial and commercial applications.

IHF Series housings robust design and high quality construction assures dependable protection for industrial and commercial applications.

MBB Series housings robust design and high quality construction assures dependable protection for industrial and commercial applications.

MBC Series housings robust design and high quality construction assures dependable protection for industrial and commercial applications.

SBB Series housings robust design and high quality construction assures dependable protection for industrial and commercial applications.

SBC Series housings robust design and high quality construction assures dependable protection for industrial and commercial applications.

SBT Series housings robust design and high quality construction assures dependable protection for industrial and commercial applications.

NY Series for Dl water, process filtration, chemical, electronics & beverages.

Fiberglass coalescer cartridges have been designed for contaminant removal, fine filtration and the effective coalescing of aerosols that can be present in a gas stream, prior to compression, gas dehydration or other critical processes, providing dual process filtration within one product configuration.

The large surface area on the outside of the element, allows for the efficient collection of contaminants. The cartridge is ruggedly constructed with a tinplated steel core to prevent collapse. The center core is wrapped with a synthetic media to prevent media migration. The fiberglass tubes are single piece construction eliminating any chance of bypass. A woven sock functions as a core cover.

(Deep Bed Scrubbers and Vessels)/Positive Pressurization Unit (PPU)

Bulk Activated carbon media (Available in bags, boxes, drums or super sacks)

Clean Liquid Systems offers the highest quality products for superior performance and efficiency for water treatment. We specialize in products that remove and reduce chemicals, pesticides, chloramines, unwanted contaminants, toxins, PFOA & PFOS contaminants, unwanted colors, odors, and tastes.

Hold up to 20,000 pounds of activated carbon.

May be run in duplex style side by side or run as daisy chain style to run multiple units at one time.

Exhaust or Recirculation Units ensures your computer equipment operates within a corrosive free environment, and within the guidelines of major computer and instrument manufacturers' warranties.

Various media types available. Blended Carbon or Potassium Permanganate coated alumina beads.

Deep Bed Scrubber shown below are typically used for positive pressure on control rooms. These units can have 6" to 18" thick beds and multiple series of stages of filter media. Often these units will have different media in the different sections to adsorb a range of gases. Deep Bed Scrubber (DBS) are designed for areas where there are high contaminant gas levels and provide more effective protection against environmentally induced corrosions in control and switch gear rooms equipped with electronic process control systems, refineries, steel mills, smelters, chemical plants, petrochemical plants and other hostile environments.

HEAVY-DUTY Industrial grade VAPCarbon V™ model filters are made up of activated carbon media, close pleated and bonded in a rigid V shaped construction with. These filters operate with no carbon shedding, with very low pressure drop and are incinerable. A combination of synthetic media and activated carbon ensure higher degree of filtration efficiency. Filters are designed for odor removal in air conditioning and industrial process applications. A header frame design allows easy installation in holding frames and housings. These filters are ideal for application in commercial buildings, airports, hospitals, hotels, restaurants etc.

Disposable V-cells with honeycomb "Style VH" is a new generation carbon filter that meets the demand of odor removal in applications where the concentrations of odor are high. Carbon filters available these days are heavy and hence require more effort in handling. Carb VH is designed in a low weight construction and the weight of carbon dominates in its total weight. A variety of carbon or carbon blend selections are offered depending on the application.

Disposable pleated carbon filters are pleated panels which offers extended surface filtration combined with odor control, designed to suit a wide variety of HVAC applications including Hospitals, Pharmaceutical companies, Food processing units, Restaurants, Airports, Commercial Buildings etc. The filters are available in MERV6 to MERV 13 efficiency with frame depth from 25 mm, 45 mm and 95 mm depths. These filters are recommended as direct replacements to existing pleated air filters. Filters are easy to install and completely disposable too.

Carb H filters are disposable type panel filters which offers excellent odor filtration, designed to suit a wide variety of HVAC applications including Hospitals, Pharmaceutical companies, Food processing unit, Restaurants, Airports, Commercial Buildings etc. These filters are used as direct replacements to existing pleated carbon air filters. Filters are easy to install and completely disposable too.

CleanPac-P filters are medium to high efficiency extended surface self-supporting Pocket (bag) filters made of super fine synthetic (Polyester) filter media. The progressive density multi-layered fiber arrangement offers excellent filtration performance combined with very high dust holding capacity. CleanPac-P is Ideal for air intake applications in Automotive paint booths, powder coating and other surface treatment plants . This is also used in air conditioning systems in Hospitals, Pharmaceutical plants, food processing plants, electronic manufacturing facilities etc. With a unique aerodynamic design, this is also available for air intake applications like gas turbines, diesel generators.

Trays are reusable panel filters that provide long life and excellent odor filtration, designed to suit a wide variety of HVAC applications including Hospitals, Pharmaceutical companies, Food processing units, Restaurants, Airports, Commercial Buildings etc. These comes in 20mm, 25mm and 45mm depths. These filters are used as direct replacements to existing air filters and also used in V Bank arrangements on Odor Control Units where handling of higher flow with high residence time is required.

V-Cell, the high efficiency Mini-Pleat compact filters made up of micro-fine glass fiber media are available in a wide range of efficiencies from MERV 12 to HEPA E12 grade. V-cells are designed for use in HVAC installations where highest degree of air cleanliness is required. The compact design, large surface area and low initial resistance made it an ideal alternative to ordinary Bag filters and Box type filters of the similar efficiencies. V Cell models are also available with very high burst resistance, low pressure drop and high dust holding capacity for extreme operating conditions like Gas Turbine air intake filtration. GTV Models are with plastic grid support.

V HEPA GT filters are the new generation type of high efficiency Mini-Pleat compact HEPA filters available in a wide range of efficiencies from E10 to E12 based on EN1822 Test standards.

4V HEPA filters are designed to use in HVAC installations where highest degree of air cleanliness is required. The high burst resistance, low pressure drop and high dust holding capacity offered by the filter made it an ideal filter for extreme operating conditions like Gas turbine air intake fine filtration. This filter perfectly suits the third stage filtration levels in Gas Turbines after a normal pre filter and medium Efficiency MERV 13 to MERV 15 fine filter depending on the applications.

Pulse Cartridges available from MERV 12 to High Efficiency E12 ratings with Nano fiber. Medias perform day in and day out in some of the toughest turbine environments on earth. From the frigid cold, to scorching heat, and salt laden costal applications we have filters to take care of your application. Superior Nano fiber treated cellulose blends or synthetic bases in efficiencies from F8-E10+. Hydro and oleophobic nanofiber stops fine salt particulate and even low surface tension liquids from penetrating.

The high efficiency Mini-Pleat compact filters made up of water resistant micro-fine glass fiber media Or Synthetic media are available in a wide range of efficiencies from MERV 12 to MERV 16 (65% - 95%+ ). V cells are designed for use in Gas Turbine installations where highest degree of air cleanliness is required. The compact design, larger surface area and low initial resistance made it an Ideal alternative to ordinary Bag filters & Box type filters of the similar efficiencies. V-Cell compact filter models are also available with very high burst resistance, low pressure drop and high dust holding capacity for extreme operating conditions like Gas turbine air intake fine filtration etc.

HEPA HV filters are manufactured from continuous length superior quality micro glass fiber paper media available in various efficiencies from H13 - H14. The filter media is moisture resistant and fire retardant. Anti-microbial treated papers are also available for special applications. The uniform and closed pleat filter pack grants a high crossing surface to hold the very fine dusts.

HYDRO Pleat filters are a new generation filter that replaces conventional coalescer filters. Hydro pleat filters are offered in G4 and M5 efficiency grades. A new generation hydrophobic Synthetic Media with a special coating offers 100 % removal of water mist from the air combined with a G4/M5 filtration efficiency is an ideal pre-filter for AHUs and Gas Turbine Intake systems operating in high humid environments like offshore installations. Hydro pleat is a 100 % coalescer filter which can challenge any competitive brands.

ASHRAE 52.2 Efficiencies from MERV 12 to MERV 16 Plus DOP and HEPA rated V-cells
EN779 Rated M6, F7, F8, F9
EN1822 Rated E10, E11, E12, H13, H14
All plastic frame with 20 or 25 mm Headers 12", 16" or 17" depth
Plastic Blow out grids to withstand up to 25 inWg. V-Cells are designed to use in HVAC installations where highest degree of air cleanliness is required.

MERV Rated MERV 11 to MERV 15 available in Box or Header style for Variable Air Volume Systems in 4", 6", and 12" depths. Medium to high efficiency extended surface deep pleated rigid box filters are manufactured from a new generation range of inherently anti-microbial, high lofted synthetic fiber filter media or micro - fine glass fiber filter media. It is capable of removing contaminants from the air stream and is an ideal fine filter for HVAC systems.

Medium to high efficiency extended surface bag filters are manufactured from a new generation range of inherently anti-microbial high lofted synthetic fiber filter media. S-BAG offers excellent filtration performance combined with high dust holding capacity and suitable for applications where highest degree of air cleanliness is required. EN779 Rated M6, F7, F8, F9.

G-Bag provides extended surface filtration through media formed into individual dust holding pockets. These pockets are created by internal span stitches to maintain uniform airflow channels for even dust loading and long filter life. The perfectly balanced pocket design allows full pocket inflation without crowding or restricting airflow to ensure optimum media utilization and thereby offering long service life. Each pocket is bonded and sealed to its own "J" channel support frame which is fastened to a heavy duty corrosion resistant steel frame with soft edges to avoid damage to the filter media. EN779 Rated M5, M6, F7, F8.

Mini pleat panel filters are the new generation of high efficiency compact filters available in a wide range of efficiencies from MERV12 to MERV 14. These filters are designed for use in HVAC installations where highest degree of air cleanliness is required. The compact design, larger surface area and low initial resistance made it an Ideal alternative to ordinary bag filters and box type filters of the similar efficiencies.

These filters are made up of water-resistant micro glass filter media, closely pleated and separated by continuous thermo-plastic bead separators. This design accommodates a very large quantity of media which offers a longer service life and low pressure drop. The Mini-Pleated media packs are encased in a metal or plastic frame that are available with single, double or no header style.

Filters are cleanable/washable panel filters made up of non woven, high lofted synthetic (polyester) filter media and are available in various efficiency grades ranging from G2 to F5. Poly-Pleat filters offer very high dust holding capacity combined with lower resistance than the other types of similar grade panel filters.

V- XL / XXL filters are made up of water resistant micro-fine glass fiber filter media, closely pleated and separated by continuous thermo-plastic bead separators. The Mini Pleated media packs are arranged in a perfect V design and sealed to the enclosing frame. The VGT model filters utilizes a special grade media offering very high dust holding capacity and the mini-pleat packs are backed with an additional plastic grid support for each media panel to ensure protection during operation at harsh conditions. Fully Potted versions are also available. Filters are absolutely metal free and so are incinerable and environmentally friendly.

High to Medium efficiency 4V Box style are mini pleated high velocity filters. These filters operate at very air flow rates up to 3000 ft³/min and are considered the best replacements for conventional box style fine filters. This also features plastic frame construction and so is a "metal free" filter that is fully incinerable. HVP are available in 4V and 2V configuration ranging from MERV 12, 13, 14 and 15. The V shaped arrangement allows more air flow per filter than a standard filter replacement and can save up to 30 % on energy. Filters are light weight and its fully plastic body makes it incinerable as well.

HEPA HVP are mini pleated box style high velocity HEPA filters. These filters operate at very high air Volume and are considered the best replacements for conventional HEPA filters. This also features plastic frame construction and so is a "metal free" filter which is incinerable. HVP are available in 6V, 4V and 2V configuration ranging from ISO 15E to ISO 50H grades.

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

End plates made from 18 gauge CRS

Made from 26 gauge CRS

Perforated metal 0.077 hole on 7/64 centers

All welded construction

Powder coat finish (Optional aluminized steel or stainless steel)

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

End plates made from 18 gauge CRS

Panels made from 26 gauge CRS

Perforated metal 0.077 hole on 7/64 centers

All welded construction

Powder coat finish (Optional aluminized steel or 304 stainless steel)

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

Made from 0.100 polystyrene plastic

All glued construction

Non removable plugs

Module is incinerable

Modules sold in sets of two

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

End plates made from 18 gauge CRS

Made from 26 gauge CRS

Perforated metal 0.077 hole on 7/64 centers

All welded construction

Powder coat finish (Optional aluminized steel or stainless steel)

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

End plates made from 18 gauge CRS

Panels made from 26 gauge CRS

Perforated metal 0.077 hole on 7/64 centers

All welded construction

Powder coat finish (optional aluminized steel or 304 stainless steel)

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

Made from 0.100 polystyrene plastic

All glued construction

Non removable plugs

Module is incinerable

Modules sold in sets of two

HEPA HV and SHV are mini pleated box style high velocity HEPA filters. These filters operate at very high air Volume and are considered the best replacements for conventional HEPA filters. These feature Metal frame construction with stamped entry and exit for greater strength and a perfect alignment every time. Available in Galvanized or Extruded Aluminum construction. Efficiency grades ranging from ISO 15E to ISO 50H grades.

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

End plates made from 18 gauge aluminized

Screw/Rivet construction

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

Made from polycarbonate plastic

Module is incinerable

Side access load systems

Modules are recommended to have foam on side for proper seal.

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

Made from polycarbonate plastic

Module is incinerable

Modules sold in sets of two

Side access load systems

Modules are recommended to have foam on side for proper seal.

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

Made from 16 gauge CRS

Welded and riveted construction

Powder coat finish (Optional aluminized steel or stainless steel)

Cells may hold activated carbon in granular or pellets as well as round chemisorbant media.

Made from 16 gauge CRS

Welded and riveted construction

Powder coat finish (Optional aluminized steel or stainless steel)

MPHT filters are designed for drying plants operating at high temperatures. This filter operates at 725ºF/385ºC, with lower pressure drop and longer service life. They replace the conventional deep pleat style filters in similar range. Maximum recommended pressure drop is 1.4 inWg.

HEPA 99.99% grade available with a Maximum Temperature of 500ºF.

HT pleat filters are designed as a pre filter operating at high temperatures up to 500ºF/260ºC, with low pressure drop and long service life. Filters are classified with MERV8/G4/EU4 efficiency. They are made with a pleat distribution of 13 pleats per linear foot and are recommended to operate up to 2000 ft³/min. Filter face area can be custom made in many dimensions and the maximum recommended pressure drop is 1.2 inWg/300 Pa.

Expanded Aluminum Foil Filter is an impingement type panel filter designed for use in residential, commercial and industrial HVAC applications to remove large airborne particulate. Popular applications include outside air intake ducts, rooftop hoods and air handling units. It is an ideal solution for any HVAC system that desires a washable and durable pre-filter with low resistance to airflow.

Single stage to 5 stage filtration

Wire Mesh to HEPA grade filters

The Flat Bank air filter housing is a permanent housing designed to hold ASHRAE rated air filters. Standard filter sizes are 2" or 4" in depth. Housings are manufactured in 8-1/2" and 12" depths. This housing is fabricated from galvanized steel or -optional T304 stainless steel and is welded together and or bolted together. The unit is one-piece construction with aluminum extrusion to hold the filters in place. Upstream corner gussets increase the rigidity of the unit. Each unit is manufactured to meet specific end user requirements.

The Side Access air filter housing is a permanent housing designed to specifically accommodate ASHRAE rated air filters. Filter efficiencies range anywhere from 30-95% by ASHRAE test method. This 22-1/4, 34-1/4, 42" or customized depth housing is manufactured with galvanized steel- optional T304 stainless steel and is intermittently welded and or bolted together. All seams are silicone caulked for airtight seal. The unit is a one-piece construction with filter track extrusion permitting either a 2", 4" or 6" prefilter track and a 1" final filter header track. Each housing is custom manufactured to meet specific end user requirements.

V Bank filter housing is a permanent single stage unit designed to hold pleated ASHRAE rated filters. The unit can accommodate both 2" and 4" filters in a low-pressure drop configuration. The V Bank unit is manufactured out of either galvanized steel or optional stainless steel and is welded and or bolted together. Each housing is custom manufactured to meet specific end user requirements.

Carbon filter/adsorber housing is a permanent multi stage unit designed to remove particulate and gas phase molecular contaminants. The molecular contamination unit accommodates either a 2" or 4" deep prefilter section as well as nominal 3/4" carbon trays. Tray configuration is based on twelve trays per twenty-four inches of height. The air filter housing can accommodate multiple face style filters in a low-pressure drop. This Carbon housing is fabricated out of galvanized steel-optional stainless steel. Corner gussets are added to strengthen the structure of the housing.

1. Virgin carbon pellet
2. Filter mesh provide large filtration area
3. Light weight and maximum air flow
4. Easy and fast installation

Fiberglass filter media rolls used in paint overspray collection and surface coating applications. Filter media is made up of glass fiber media. Typical thicknesses 2.5" are available in rolls and cut to length pads.

Various lb·ft² of glass fiber media provide different efficiency levels and greater dust holding capacity.

Removes all smells/odors when used with fan through activated carbon.

• The professional grade carbon filters(50 mm carbon bed depth) in a variety of sizes to fit 4" 5 " 6" 8 " 10" 12" fans.
• 53% Open area custom mesh for maximum airflow.
• 100 % Virgin activated carbon, 4 mm pelletized carbon or light granulated carbon.
• Aluminum flanges are light weight, and it looks beautiful. The colors available are usually silver, light green, light pink or can be other colors for OEM orders.
• Pre filter set is included