Clean Liquid Systems
Clean Liquid Systems
20150 Kuykendahl Rd. Unit 200
Spring, Texas 77379
Phone: 713-253-0100
Fax: 732.493.8954
E-Mail: info@cleanliquidsystems.com
Website: www.cleanliquidsystems.com
Print Back
NY Series for Dl water, process filtration, chemical, electronics & beverages.
Unit of Measure

Specifications

Brands

 N/A Clean Liquid Systems

Membrane

 N/A Nylon 6, 6

Support Media Material

 N/A Polypropylene

End Caps Material

 N/A Polypropylene

Outer Support Cage Material

 N/A Polypropylene

Maximum Operating Temperature

 N/A 175 ºF

Nominal Outside Diameter (O.D.)

 N/A 2.65 in

Nominal Center Inside Diameter (I.D.)

 N/A 1 in

Maximum Differential Pressure

 N/A 45 psid

Retention Rating

 N/A 0.03 µm0.1 µm0.2 µm0.45 µm0.65 µm0.8 µm1.2 µm5.0 µm10 µm20 µm

Building a Part Number

Cartridge Lengths

 N/A 10 in20 in30 in40 in

Center Core Material

 N/A Polypropylene

Available End Caps

 N/A 222/Closed 222/Fin 226/Closed 226/Fin Double Open End (DOE) Gasket

Gasket/O-Ring Material

 N/A Buna Ethylene Propylene Diene Monomer (EPDM) Fluorocarbon (FKM) Neoprene Polytetrafluoroethylene (PTFE) Silicone

Rinse

 N/A 18 MΩ

Toxicity

Toxicity

 N/A Cartridges are manufactured with no additives or other manufacturing agents. We guarantee all materials used in the production meet FDA Title 21 of the Code of Federal Regulations 174.5 and 177.1520.

Purity

Purity

 N/A Cartridges are Free of Surfactants, Resins, Binders and Adhesives

Sterilization

Sterilization

 N/A Multiple Autoclaving for 30 Minutes at 250ºF (121ºC) under no End Load Conditions, In-line Steam Sterilization is not recommended. May be In-line Sanitized with Hot Water at 180ºF (82ºC) for 1 hour.

Features and Specifications

Features and Specifications

 N/A
  • Nylon 6, 6 cartridges offer a wide array of micron ratings from 0.03 to 20 microns
  • All Nylon 6, 6 are produced in-house on the most modern equipment available
  • Complete in-house testing guarantees a superior and consistent product
  • We offer all end cap configurations to provide the proper cartridge to fit your applications and housing
  • All Nylon 6, 6 membrane elements are internally supported offering strength to prevent media failure
  • Cartridges have excellent dirt holding capacity with low flow resistance
  • All media materials used in production are FDA Title 21 compliant
  • End caps are thermally welded with no additives
  • Cartridges are constructed in a clean room environment
  • Naturally hydrophilic media does not need to be wetted before use
  • Cartridges may be ordered as final rinsed with 18 MΩ water

Applications

Applications

 N/A Beverage Drinking Water Food High Purity Water

Additional Information

Additional Information

 N/A Complete line of absolute rated membrane filter elements for your most demanding applications; we can also custom manufacture for your systems and applications up to 40 inches in length.

CLS helps you meet today's regulatory requirements and provide fresh drinking water to satisfy growing population needs and Water shortages. CLS's filter cartridges and housings are designed to ensure your process will continue to provide fresh drinking water by eliminating sediment and other impurities. CLS continues to develop new and innovative products to meet the challenges in cost effective filtration.