Clean Liquid Systems
Clean Liquid Systems
20150 Kuykendahl Rd. Unit 200
Spring, Texas 77379
Phone: 713-253-0100
Fax: 732.493.8954
E-Mail: info@cleanliquidsystems.com
Website: www.cleanliquidsystems.com
Print Back
All elements are 5 layers construction for maximum pleat support and dirt loading.
Unit of Measure

Specifications

Brands

 N/A Clean Liquid Systems

Support Media Material

 N/A Polypropylene

Seal Material

 N/A Thermal Bond

Nominal Outside Diameter (O.D.)

 N/A 6.25 in

Maximum Differential Pressure at 180 Degree Fahrenheit (ºF) (82 Degree Celsius (ºC)) Temperature

 N/A 50 psid

Materials of Construction

Core Material

 N/A Polypropylene

Netted Outer Cage Material

 N/A Polypropylene

Building a Part Number

Filter Media

 N/A Polypropylene Melt Blown

Retention Rating of 90 and 99.98 Percent (%)

 N/A 0.2 µm0.45 µm0.5 µm1 µm3 µm5 µm10 µm25 µm50 µm100 µm

Efficiency

 N/A 90 %99.98 %

Cartridge Lengths

 N/A 20 in30 in39 in40 in60 in80 inCustom

Gasket/O-Ring Material

 N/A Buna Ethylene Propylene Diene Monomer (EPDM) Fluorocarbon (FKM) Neoprene Polytetrafluoroethylene (PTFE) Silicone

Available End Caps

 N/A 222/Flat 225/Flat 226/Flat Custom Flat/O-Ring

Rinse

 N/A 18 MΩ

Food and Drug Administration (FDA) Listed Material

Food and Drug Administration (FDA) Listed Materials

 N/A Manufactured from materials which are FDA listed for food contact applications in Title 21 of the U.S. code of federal regulations

Toxicity

Toxicity

 N/A Cartridges are manufactured with no additives or other manufacturing agents. We guarantee all materials used in the production meet FDA Title 21 of the Code of Federal Regulations 174.5 and 177.1520.

Purity

Purity

 N/A Cartridges are Free of Surfactants, Resins, Binders and Adhesives

Sterilization

Sterilization

 N/A Multiple Autoclaving for 30 Minutes at 250ºF (121ºC) under no End Load Conditions, In-line Steam Sterilization is not recommended. May be In-line Sanitized with Hot Water at 180ºF (82ºC) for 1 hour.

Features and Specifications

Features and Specifications

 N/A
  • Offers the highest grade, 90% and 99.98% efficient elements on the market today
  • Our media is manufactured in-house under strict guidelines to ensure consistency and maximum dirt loading
  • In-house lamination and calendaring of our medias allow us to control the final media grades
  • Complete in-house testing with a Capillary Flow Porometer guarantees a superior and consistent product
  • With 8 µm ratings and multiple lengths and 4 end cap configuration to ensure we produce the element you require
  • Elements have thermally bonded end caps and ultrasonic welded media seams for a one piece construction
  • Final, one piece construction up to 40" long ensures zero bypass
  • We install the maximum amount of media in each filter without pleat binding for increased dirt loading capacity
  • Elements are 100% polypropylene - media, inner and outer supports mesh and end caps
  • Elements meet FDA Title 21 regulations for food and water contact
  • Cartridges are constructed in a clean room environment
  • Cartridges may be ordered as final rinsed with 18 MΩ water
  • We offer inside out OR outside in flow pattern for your specific housing application.
  • Longer service life equals reduced maintenance and downtime

Applications

Applications

 N/A Beverage Drinking Water Food High Purity Water

Additional Information

Additional Information

 N/A Complete line of absolute rated membrane filter elements for your most demanding applications; we can also custom manufacture for your systems and applications up to 40 inches in length.

CLS helps you meet today's regulatory requirements and provide fresh drinking water to satisfy growing population needs and Water shortages. CLS's filter cartridges and housings are designed to ensure your process will continue to provide fresh drinking water by eliminating sediment and other impurities. CLS continues to develop new and innovative products to meet the challenges in cost effective filtration.